| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Installation Method: |
Horizontal |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Unicue table desian, exhaust from four sides, buitin dust removal svstem, fan noise insulation, no need for pipeline connecion, indoor circulatiorof clean ai indoors,reducing energy expendiure. The dust grinding table can effectively caplure fine suspended dust without interering wih workersmovement and vision. it is an ideal choice for small and medium-sized parts with fine machining and ireqular shape.
1.Appearance| HXHJ-DM30 | |
| Brand | Downdraft Table |
| Model | Cable Length |
| Airflow | 3000m³/h |
| Cleaning Method | Automatic Pulse Cleaning |
| Filter Cartridge | φ325*L450mm |
| Filter Material | Polyurethane fiber +PTFE film |
| Filter Brand | Jinan Huaxin |
| Suction | Side Suction+Bottom Suction |
| Wind Pressure | 1580-1720Pa |
| Efficiency | ≥99.99% |
| Filter Granular | ≥0.3μm |
| Power | 3.0kw |
| Voltage | 380V/50HZ/3Phase |
| Filter Area | 7.5m2 |
| Work Life | ≥5000h |
| Table Dimension | Carbon Steel, 800*920mm |
| Dimension | 1010*910*1660mm |
| Raw Material | Carbon Steel, 2mm |
| Noise | 75±3dB |
| Fan Brand | Yinniu, Zhejiang |
| Power Cable | 5*1.5mm² |
| Cable Length | 2m |
Q1: Is there any noise?
A 1: The fans will have sound insulation cotton and will not produce excessive noise.
Q2: Why is the plastic spraying process recommended for the surface treatment of the dust colector?
A 2: The paint is not easy to fal off , and it is more durable.
Q3: How to configure the air volume of the dust colector?
A 3: There is an exhaust port at the botom of the cutting platform, which is already standard when the laser cutting machine leaves the factory. You only need to measure the diameter of the pipe , and then tel us, by calculation, you can know how much air volume is needed for the dust collector .
Q4: Alot of sparks wil be generated during cutting, which may scald the filter material of the dust collector or burn the filter material directly, causing a fire accident . How to avoid such accidents?
A4 : Install spark catcher. There are three types of spark traps, embedded baffle type, pipe baffle type, and pipe swirl type.The spark catcher uses a labyrinth structure to make the spark enter the cold plate several times to extinguish it .
Q5: The dust and fume generated during cutting will polute the air in the workshop .How to eliminate such pollution?
A5 : The high - precision imported flame-retardant filter material is used as the standard filter cartridge filter unit to filter dust and smoke, similar to the filter element of an automobile engine .
Q6: Do you need to vent a chimney?
A 6: No need to discharge the chimney. High-precision filter material is used to filter 0.3Um dust , with a dust removal efficiency of over 99%, and it can be directly discharged indoors .
Q7: Can the environmental protection meet the standards?
A7: It can meet the standard.
){kind=link}